Reservoir levels and rainfall figures

Last reviewed:

From 1-31 January, rainfall across the Thames catchment was 41% of the 134 year historic monthly average, with 28.8mm.

Rainfall in the last year

The graph below shows the rainfall over the last year and percentage increase and decrease against the monthly average.

Rainfall percentages for the last 12 months in relation to long term average rainfall

Where our water comes from

Across our region, we take about 65 per cent of our source water from rivers, in a process called abstraction. We then store this in large, open reservoirs (known as surface reservoirs) before putting it through our treatment process to turn it into drinking water.

The remaining 35 per cent comes from natural underground reservoirs called aquifers, from which we pump water using boreholes. This water has originally fallen as rain and sunk down into the ground in a process called recharge. These supplies from aquifers are referred to as groundwater.

Find out more about where our water comes from

Reservoir and water levels

The diagram below shows the rainfall and levels of water in the rivers, aquifers and reservoirs in our area, for the last month.

Reservoir and rainfall diagram

Water situation summary

On 31st January, the Thames Regional Soil Moisture Deficit (SMD) total was 2 mm which is slightly higher (i.e. drier) than expected for the time of year.

At the end of January, groundwater levels were below average.

Generally, river flows were significantly below their long term averages in January. The Teddington Target Flow, which determines the minimum flow that must be maintained over Teddington weir, has been maintained at 800 Ml/d in January.

Reservoir storage on the 31st January 2019 for London as a whole was 94% (West London 95% & Lee Valley 87%) and Farmoor storage was 97%.